Teng Chui Ow
Manager – Engineering & Project
About
Senior Engineering & Project Manager with 30+ years experience in mold manufacturing, injection molding, NPI, automation and large-scale production operations across Malaysia, Japan and Indonesia. Proven achievements: Managed 40–220 personnel across Engineering, NPI, QC, Planning, Maintenance & Production. Delivered 18 new molds, 12 stamping dies and 1 plating line with Japan HQ. Implemented automation that reduced 30+ operators and saved RM60,000 monthly. Improved quality from 2000 ppm → 300 ppm using Lean & systematic process control. Led engineering integration of One Line Production (stamping → plating → molding → inspection → packaging). Strong in QCD management, KPI deployment, continuous improvement, vendor development and customer technical communication. Fluent in English, Mandarin, Bahasa Malaysia with basic Japanese. Currently open to opportunities in: Senior Engineering Manager, Manufacturing Manager, NPI Manager, Program Manager, Operation Manager, or similar roles in Semiconductor, EMS, Medical Device, Automotive Tier-1 or high-tech manufacturing.
Malaysia
Seri Kembangan
Consumer Goods
Vendor Management, Problem Solving (8D / 5 Why), Production Planning, Leadership and Team Management, Quality Management (ISO9001 / IATF 16949）, Root Cause Analysis, Continuous Improvement, Lean Manufacturing, Automation, Mold Development, Injection Molding, Project Management, New Production Introduction (NPI), Manufacturing Operations, Engineering Management
Experience
Manager – Engineering & Project
PT Hon Foong Plastic Industrial Ltd – Indonesia (2025 – Present)
Batam, Riau Islands, Indonesia
Lead 40 engineers for NPI, mold development and process improvement. Improve engineering response time & project delivery. Strengthen automation and cost-down initiatives.
Engineering Department Manager
PT Hon Foong Plastic Industrial Ltd
Lead 40 engineers overseeing NPI, mold development, process improvement and customer technical communication. Drive automation and engineering standardization to support cost-down initiatives. Improve project lead time and engineering response to customers.
Manager – Engineering Division
Hirose Electric Malaysia
Shah Alam, Selangor, Malaysia
Led 50 engineers, reported to General Manager. Delivered 18 molds, 12 dies, 1 plating line with Japan R&D. Achieved RM60,000 monthly cost saving via automation. Delivered 300 ppm reject rate and 5.4% profit margin. Implemented integrated One Line Production.
Manager – Molding Division
Hirose Electric Malaysia
Shah Alam, Selangor, Malaysia
Managed 7 departments & 220 employees. Full QCD ownership, automation, manpower and KPI. Standardized molding parameters and Lean operations
Assistant Manager – Molding
Hirose Electric Malaysia
Shah Alam, Selangor, Malaysia
Reject from 2000 ppm → 300 ppm. Installed 80 Keyence Vision Systems. Introduced 200+ cavity pressure sensors. Built dual-robot automation projects.
Engineering Division Manager
Hirose Electric Malaysia Sdn. Bhd.
Reported to General Manager; led 50 engineers. Developed company’s first One Line Production integrating stamping, plating, molding, inspection and packaging. Delivered 18 molds, 12 dies and 1 plating line in collaboration with Japan R&D. Achieved RM60,000 monthly labour savings, 300 ppm internal reject, 5.4% profit margin. Standardized engineering processes and strengthened ISO compliance.
Division Manager
Hirose Electric Malaysia Sdn. Bhd.
Managed 7 sub-departments and 220 employees. Full responsibility for Quality, Cost, Delivery, line efficiency, manpower, automation and KPI. Implemented Lean system and maintained stable molding parameters.
Assistant Department Manager
Hirose Electric Malaysia Sdn. Bhd.
Key Achievements: Reject reduced from 2000 ppm → 300 ppm. Installed 80 sets of Keyence vision systems. Implemented 200+ mold cavity pressure sensors for short shot detection. Introduced dual robot part picker and ultrasonic cleaning systems. Developed China spare-parts suppliers reducing procurement cost.
Project / Design / QC Manager
Lipro Mold Engineering Sdn. Bhd.
Bandar Baru Bangi, Selangor, Malaysia
Led 70+ design engineers + 9 outsource vendors. Delivered 800+ mold designs. Managed Perodua D20N model tooling. Achieved 0% major audit findings for ISO 9001. Completed projects in UK, Japan, Belgium, Taiwan.
Project Manager
Lipro Mold Engineering Sdn. Bhd.
Managed Perodua D20N mold development (door handle, rocker panel, steering column). Led customer communication, trials and improvement presentations.
Design Department Manager
Lipro Mold Engineering Sdn. Bhd.
Led 70+ design engineers + 9 outsource teams delivering 800+ mold designs. Managed timeline, design reviews, VA/VE and standardization.
Production And Quality Manager
Lipro Mold Engineering Sdn. Bhd.
Achieved 0% major audit finding (ISO 9001). Led FMEA, TPS and cost-down activities.
Assistant Quality Assurance Manager
Lipro Mold Engineering Sdn. Bhd.
Achieved 117% T3 target, 1% NCR cost rate. Oversaw 300+ mold designs. Attended mold trials in Belgium & Taiwan.
Tools Designer
Lipro Mold Engineering Sdn. Bhd.
Designed molds for Sony TV, Philips LED TV, Triumph Motorcycle and various automotive components. Training (3 months) at Ikegami Mold (Japan).
Education
Anglia Ruskin University
Teng Chui Ow's Contact Information
Phone
Find the Right Leads
Find Verified Contact Data
What LeadContact does well
Find verified emails, phone numbers, and decision-makers with 98% accuracy.
Find Leads
Find the right people by company, role, industry, location, and more.
925M+ professional profiles
Find Emails
Access verified email addresses for your target contacts.
657M+ emails
Find Phone Numbers
Get cross-validated phone data from multiple top sources.
239M+ phone numbers
More Accurate. Lower Cost.
Find contact data in 1 tool with 98% accuracy
LeadContact integrates leading enrichment tools to deliver more accurate contact data—without paying for each one.
Great conversations start with the right contact.
It’s time to find yours.