anthony lee

metrologist

About

Experienced Metrologist with a demonstrated history of working in the consumer goods industry. Skilled in Quality Management, Root Cause Analysis, Continuous Improvement, Calibration, and Dimensional Metrology. Strong operations professional with a Acquired Associate in Arts focused in Electrical and Electronics Engineering from Anne Arundel Community College.

Country

united states

City

gallatin

Industry

consumer goods

Skill

quality control, testing, manufacturing, calibration, inspection, quality management, metrology, lean manufacturing, cmm, as9100, continuous improvement, iso 9000, maintenance and repair, electronics, manufacturing processes, root cause analysis, dimensional metrology, six sigma, pc dmis level iii dcc cmm, amse y14.5m 1994 gd&t, airframe and powerplant mechanic, inspection authorization license, commercial pilot airplane s.e.l

Experience

quality control inspector

eaton

2005-9 - 2007-7 · 1 yr 11 mos

As Quality Control Inspector at FAA, EASA, and CAAC Repair Station and FAA-PMA Manufacturing Facility in the Calibration Lab operate and program a Mitutoyo Bright A1220 CMM running GeoMeasure 6000 and Zeiss Contura CMM running Calypso to perform inspections of manufactured aircraft and industrial parts in accordance with engineering drawings. Maintain, repair, calibrate, and track all gauges, tools, fixtures, and instruments used on shop floor, record tool calibration data in Gagetrak 6.5 gauge tracking software. Apply AS9100 quality control procedures.

quality control inspector

kaydon ring & seal, inc division kaydon corporation

2005-3 - 2005-9 · 7 mos

As a Quality Control Inspector at Jet Engine Ring and Seal Manufacturing Facility, perform inspections of manufactured rings and seals. Apply AS9100 quality control procedures.

quality control lead inspector

pats aircraft, llc

2000-8 - 2005-3 · 4 yrs 8 mos

As a Quality Control Lead Inspector at FAA Repair Station and FAA-PMA Manufacturing Facility, manage a group of 3 inspectors; perform inspections and nondestructive testing of manufactured mechanical and electrical aircraft parts. Electronic assemblies inspected to IPC-A-610, printed circuit boards inspected to IPC-A-600, read and interpret engineering drawings and schematics, recording and evaluating test data, apply AS9100 quality control procedures, maintain tool calibration system.

aircraft technician

chesapeake aviation services

1991-3 - 2000-8 · 9 yrs 6 mos

As an Aircraft Technician, perform aircraft inspections, maintenance, repairs, installing Supplemental Type Certificates, overhauls and testing of engines and airframes. Worked with the FAA FSDO on design and installation of Field Approvals. Maintained Aircraft records in accordance with design data and current FAR. As a Repairman tested and certified altimeter and transponder systems.

metrologist

beretta usa

2008-7 - Present · 18 yrs 3 mos

As a Metrologist at a Firearms Manufacturing Facility in the Metrology Lab operate and program a Brown & Sharpe Global 575 CMM running PC-DMIS CAD++, Quantum 7 Axis Faro Arm CMM running CAM2 Measure X, and a Nikon VM-500V Vision System running Quadra Chek QC5000 to perform inspections of manufactured parts in accordance with engineering drawings. Maintain, repair, calibrate, and track all gauges, tools, fixtures, and instruments used on shop floor, record tool calibration data in Calibration Manager 4 gauge tracking software. Apply ISO 9001 quality management procedures. Work with and act as lead auditor for company internal audits.