Paulo Mazonetto

Responsible for managing power substation projects (EPC and SPCS), enforcing all project milestones within the plan, managing physical and financial schedules, defining the overall project objective, individual objectives, activity schedule, responsibilities and resources, having as one of its main attributions to avoid that failures inherent to the processes occur, capable of foreseeing difficulties and acting preventively ensuring the smooth progress of the work. Responsible for performing a contract analysis and ensuring delivery, execution, results and objectives. Able to manage the phase of civil construction, electromechanical, electrical assembly and commissioning. Responsible for representing the company (its values and goals), with the client, Beinf the focal point of communication between the client and as internal areas. Manage the project and progress of the execution of the sales engineering field, from the beginning of the meeting (internal, supplies, production projects, logistics, TAFs, assembly and commissioning). Identification of risks, opportunities, promoting as mitigation actions. Negotiate and manage complaints, change requests, contractual amendments. Manage milestones, delivery schedules, coordinate communication and fluidity of the actions of the parties involved. Manage deliveries, analyze and solve problems, pending issues and difficulties. Consolidate project KPIs management, prepare and present reports for area management. Managed Projects: Agudo Substation: ssembly of the Temporary Arrangement and retrofit in the 69kv/ 23kv/13.8kv sector. Eugenio de Castro Substation: Construction of the substation on of the 69kv/13.8kv/23kv substation. Jaguari Substation: Assembly of the Temporary Arrangement and retrofit in the 69kv/ 23kv/13.8kv sector. Cachoeira do Sul Substation: Assembly of the Temporary Arrangement and retrofit in the 69kv/ 23kv/13.8kv sector. Santo Augusto Substation: Retrofit of 69kv/23kv/13.8kv complete bay.

Responsible with contract analysis (EPC/SPCS), together with the Project manager, plan in order to guarantee the necessary deliverables for the execution of the project, as well as the objectives and results of the area, as well as the objectives and results of the area. Responsible for project planning, (EPC/SPCS), from the elaboration of executive schedules, planning of project development, purchase requests, fabrications, commissioning, outsourced contracts (planning and follow-up), execution of civil, electromechanical and electrical activities, field commissioning and follow-up with clients. Working closely with the Project Manager in the management/integral update of the project execution progress, from the sales handover, kick off meeting, engineering, procurement, manufacturing, logistics, TAFs, assembly and field commissioning. Skill in identifying early risks, opportunities, promoting mitigation actions. Assist in the management of claims, change orders, and contractual amendments. Plan and assist in the management of milestones, delivery schedules and installation of components for field assembly of equipment, production progress and transportation, enforcing established deadlines, coordinating communication and fluidity of actions of the involved parties. Plan and make feasible the management of the contractual delivery process, analysis and resolution of problems and pending issues, ensuring the issuance of the provisional and final acceptance certificate, to start the warranty period. Do with the Project Manager the management of KPI ́s of the project, analyze, prepare and present the results of progress (internal and external). Planned Works: Miguelópolis Substation: Construction from area suppression to energization of the 138kv/13.8kv substation. Salto de Pirapora Substation: Amplification of the 138kv bar, implementation of two back to back capacitor banks. Araçariguama Substation: Construction of a new 138kv/13/8kv bay.

Responsible for the coordination of processes and personnel. Team Leader at the Transformers and Reactors plant, in the final assembly sector, preparation of tanks tanks, electrical panel assembly, disassembly and shipping; responsible for planning to coordinate manufacturing activities related to production control, maintenance, quality, daily activities planning, team management and improvement programs. Responsible for monitoring the execution of production programs, analyzing and recommending the development of techniques, equipment and devices to improve the performance, quality and costs of manufactured products. Responsible for feeding database and spreadsheets aimed at controlling H/H production, defining work strategies, distributing activities to the team, monitoring personal performance. Experience with design review meetings and discussions and improvements and adjustments to designs, devices and processes. Experience in the manufacturing process of transformers and reactors, activities such as: pressing of the active part and closing of transformers and reactors, vacuum process, tightness, wall deformation test, electrical resistance of windings, transformation ratio, insulation resistance, polarity, angular sequence and phase shift, no-load losses and excitation current, load losses and short-circuit impedance, power factor (PF).

Main responsibility - Responsible for full Project Management. Responsible for full Project Management during the phases of: development, manufacturing, installation and commissioning and final delivery to the customer, financial, technical, resources and hours dedicated to the project, preparation of risk management plans, aiming at the financial, technical and resources integrity committed to the project, providing adequate and satisfactory technical solutions to the customers, meeting the deadlines established in the contract, valuing the good relationship with them, Supported by the engineering team, we prepare presentations and technical and commercial solutions for the customers. Experience with kick-off meetings, project phase approvals, (technical and commercial approvals). Skilled in developing risk management plans and strategies to minimize project impacts. Responsible for preparing schedules for field activities such as: transportation, mobilization, daily activity definitions, installations, commissioning, documentation delivery and O.D.R. delivery and completion. Completed Projects: Reprogram the Cotton Cell: Logic changes and reduction path to reduce cycle time. Cycle Time: Development that the devices would be triggered: Development that the devices would be triggered with a reduction to installation of 13 seconds in the light process, force to operator 15KN/cm², with within the installation curtain area of the sensing table to reduce the ergonomic process. Spot Wellding Cell: Spot Welding Cell, with three devices, configuration system. New Autometal Cell: Arc Welding Cell with two devices, plug-in play configuration system. IHT Positioners: Manufacture of two IHT format positioners. Clearing 2000t: Assembly of the cell casing system, overlap mechanism rails, safety system and indexing of parts in rakcs through logic.

Coordinate in the activities of electrical and electronic assemblies and oil testing processes, spray tests, electrical deformation, commissioning, (polarity sense - polarimeter, (insulation recommendations - Megger, continuity, angular displacement of the active part -SFRA) in transformers and reactors). Experience with tasks and objectives of daily activities, preparation of RDOs and work activity schedules. Knowledge of winding electrical resistance testing, transformation ratio, insulation resistance, polarity, angular displacement, empty species, activation sequence, loaded sequences, impedance short circuit and power factor (PF). Skill in customer and team relations.

Internship in the PDT program (Talent Development Program) for two years. Experience and performance of parameterization, testing and commissioning activities in protection and control relays, networks and logic IEDs, GPS configurations, Switches, communication between equipment, functional tests in electrical panels, PRE FAT and FAT (Factory Acceptance Test), CAT (Commissioning Acceptance Test) field commissioning and bench tests. Experience in the project sector, experience and performing development activities for projects and control. Assistance in the preparation of diagrams and architectural designs of electrical networks, logical IEDs, construction of panels and racks, interconnection between site equipment and panels and selectivity study (Software: AutoCad, ERP, Simaris). Experience with testing of protection relays and electrical panels using Omicron box, 7SA, 7UT, 7SD, 7UM, 6MD, 7SJ. Assistance in equipment coordination studies such as: (short circuit currents, load flow, voltage drop and energy balance); (Software: Simatic, Sinamic, Simaris). - Job rotation: - Electrical Panels Factory: Objective: acquire knowledge of production methodologies and tools. - Experience in the routines of the Technical Leaders, assisting them in the preparation of technical documentation and schedules.

Estudy of machine layout aiming lower cycle time and decreasing human ergonomics, study of the performance of new layouts and improvement of previous ones if possible, chrono-analysis, analysis of cycle time reduction avoiding bottleneck operation, and meeting the factory indicators. Study of the best work methodology (in the case of this project the methodology used was the P.D.C. A. Elaboration of projects to adapt eccentric presses, which meet the premises in accordance with NR 12, making possible automations and optimizing cycle time. Implementations: concepts about 5s kaizen poka-yoke and total productive maintenance

a course to present and understand about Project Agile, addressing the theme "A New Model of Management in Organizations..