Max Chow

• Follows complex defined test plans and datasheets with necessary supervision/support. Evaluates test performance and sample operation to properly evaluate test results. • Communicates project status and results as needed. Manages the compilation of test reports in terms of recording test results and accuracy of information. Works to agreed deadlines and managing project related activities. • Examines complex customer samples with help and learns to perform appropriate tests. Communicates with customers during setup and operation to ensure proper evaluation • Understands specific test standards and product technology for scope of responsibility. • Directs, builds and/or adapts simple test setups and equipment for assigned work, based on test plans and instructions from engineering. • Operates and maintains complex test equipment appropriately to measure and test customer samples. Performs complex maintenance on designated test equipment and laboratory area. May perform complex calibration of test equipment • Integrates basic continuous improvement concepts and techniques for both process and equipment. Communicates with management and technical staff to provide suggestions for new equipment, processes, and forms to improve accuracy and efficiencies.

- Food preparation and cooking (hot food / sushi items) - Salmon fillet preparation for sushi use - Cashier - Estimate food and stuffs order for daily operation - Store room stock take to ensure there have sufficient material for operation - Repair, provide technical advice and possible solution for electrical/ electronics/ IT system

- Carry out corrective and preventive maintenance on various electronics system. - Provide technical advise to improvement / refurbishment on existing electronics system to client. - Source spare parts / comprehensive parts, invite potential supplier to provide quotation and execute purchase process. - Setup testing environment for system overall testing using specific electronics instruments: Digital Multi-meter, Functional Generator, Oscilloscope, spectrum analyzer, Network analyzer, power meter, frequency counter...etc - Analysis schematics, circuit diagram for Electrical/ Electronics system - Handle system upgrade Project, liaise with client and contractor for the project timeline, carry out site acceptance test after installation( CCTV system, x-ray baggage inspector) - Documentation preparation (Inspection Report, Acceptance test report) Through out the repair works in EMSD, I responsible for the various electronics system as below - Analogue and digital Surveillance System with Optical fibre transmission ( monitoring and recording of CCTV) - Public Address system, Audio and Visual system - Uninterrupted Power Supply system (Power system, Tower type) - X-ray baggage inspection system - HF Radio system (Transceiver and Radio console) - Medical Equipment (Haemodialysis Unit, RO water system, Infusion pump) - Baggage Handling System and perform first line corrective maintenance works in HK airport (PC based server, Sorting system, conveyor system, PLC controller, Infra-red and RFID tracking system) - Fault diagnosis on PCB and replace defective component

As a electronics technician work in a shift duty base in Hong Kong International Airport, responsible to carry out front-line repair and fault rectification on Baggage Handling System. My job duties were to analysis nd program all electronics related devices such as RFID Reader, Frequency Inverter, system modem, PLC. Besides, I always work with other field colleagues to repair electrical and mechanical system.

As a team leader of one of three maintenance team - Manage hill-top system parameter / status send back to Head office through Radio Link (Telemetry system) - Work with oversea engineer from factory to install new UHF/SHF antenna, running high power coaxial cable and connector, use network analyzer to ensure signal cable within transmission specification. - Trouble shooting and perform testing with Electrician on Power system, including UPS system, power generator, ATS static transfer switch. - General building maintenance at hill-top station - Helicopter goods lifting commander (on site) when we transport building material to hill-top station

-Building up Digital TV broadcasting network in HK - Setup Hill-top Microwave Antenna, Waveguide transmission, Digital Broadcast equipment - Install RF Antenna and cable connection at 30 meters tall antenna pole - Function Test on UPS system interface with Power system and generator - Setup Telemetry link for remote data collection and control - Repair of TV broadcasing (Analogue and Digital) equipment at Hill-top station - To carry out both corrective and preventive maintenance on TV Broadcasting System, Radio communication system ( SHF, UHF,VHF) - Repair of CABD system (Communal Aerial Broadcast Distribution) - Onsite calibration for TV transposer with Tone generator, Spectrum Analyser, Frequency Counter to ensure both output power and frequency for desired TV channel are correct - Fault diagnosis and repair the faulty component on PCB

- Carry out onsite preventive / corrective maintenance service for Cable Aerial Broadcasting Distribution system in estate. - Using RF signal meter to measure signal level in the desired point, according to system distribution and TV reception standard to adjust distribution amplifier to get the best signal reception for end user. - Equipment replacement in the distribution head-end with the suitable setting and confirm no interference to other TV channel. - TV and Satellite Antenna (Mesh/ Solid dish) and receiver installation/ replacement at roof top - Carry out system installation and troubleshooting works on security system and burglar alarm system (include CCTV system, door lock system, doorphone system)

To learn on-site repair and fault following skill To familiar with CCTV, CABD, SMATV and security system Part-time day release study in electronics and communication engineering