Jotham IHIMBAZWE

1.𝙀𝙣𝙨𝙪𝙧𝙞𝙣𝙜 𝙨𝙩𝙧𝙞𝙘𝙩 𝙖𝙙𝙝𝙚𝙧𝙚𝙣𝙘𝙚 𝙩𝙤 𝙨𝙖𝙛𝙚𝙩𝙮 𝙨𝙩𝙖𝙣𝙙𝙖𝙧𝙙𝙨 𝙨𝙪𝙘𝙝 𝙖𝙨 𝙍𝙀𝙂 𝙍𝙚𝙩𝙞𝙘𝙪𝙡𝙖𝙩𝙞𝙤𝙣 𝙎𝙩𝙖𝙣𝙙𝙖𝙧𝙙𝙨 𝙖𝙣𝙙 𝙄𝙎𝙊 45001 𝙜𝙪𝙞𝙙𝙚𝙡𝙞𝙣𝙚𝙨 2.𝘾𝙤𝙣𝙨𝙩𝙧𝙪𝙘𝙩𝙞𝙤𝙣 𝙤𝙛 𝙃𝙑, 𝙈𝙑, 𝙖𝙣𝙙 𝙒 𝙡𝙞𝙣𝙚𝙨, 𝙥𝙤𝙡𝙚𝙨 𝙚𝙧𝙚𝙘𝙩𝙞𝙤𝙣, 𝙞𝙣𝙨𝙩𝙖𝙡𝙡𝙖𝙩𝙞𝙤𝙣 𝙤𝙛 𝙈𝙑 & 𝙇𝙑 𝙘𝙖𝙗𝙡𝙚 𝙖𝙘𝙘𝙚𝙨𝙨𝙤𝙧𝙞𝙚𝙨, 𝙡𝙞𝙣𝙚 𝙨𝙩𝙧𝙞𝙣𝙜𝙞𝙣𝙜, 𝙖𝙣𝙙 𝙞𝙣𝙨𝙩𝙖𝙡𝙡𝙖𝙩𝙞𝙤𝙣 𝙤𝙛 𝙩𝙧𝙖𝙣𝙨𝙛𝙤𝙧𝙢𝙚𝙧𝙨 𝙖𝙣𝙙 𝙧𝙚𝙡𝙖𝙩𝙚𝙙 𝙖𝙘𝙘𝙚𝙨𝙨𝙤𝙧𝙞𝙚𝙨. 3.𝙈𝙖𝙞𝙣𝙩𝙖𝙞𝙣𝙞𝙣𝙜 𝙖𝙣𝙙 𝙞𝙣𝙨𝙥𝙚𝙘𝙩𝙞𝙣𝙜 𝙩𝙤𝙤𝙡𝙨, 𝙢𝙖𝙩𝙚𝙧𝙞𝙖𝙡𝙨, 𝙖𝙣𝙙 𝙚𝙦𝙪𝙞𝙥𝙢𝙚𝙣𝙩; 𝙥𝙧𝙤𝙢𝙥𝙩𝙡𝙮 𝙧𝙚𝙥𝙤𝙧𝙩𝙞𝙣𝙜 𝙖𝙣𝙮 𝙙𝙚𝙛𝙞𝙘𝙞𝙚𝙣𝙘𝙞𝙚𝙨 𝙤𝙧 𝙢𝙖𝙡𝙛𝙪𝙣𝙘𝙩𝙞𝙤𝙣𝙨 4.𝘾𝙤𝙣𝙙𝙪𝙘𝙩𝙞𝙣𝙜 𝙩𝙧𝙖𝙣𝙨𝙛𝙤𝙧𝙢𝙚𝙧 𝙤𝙞𝙡 𝙩𝙚𝙨𝙩𝙞𝙣𝙜, 𝙩𝙧𝙖𝙣𝙨𝙛𝙤𝙧𝙢𝙚𝙧 𝙧𝙚𝙨𝙞𝙨𝙩𝙖𝙣𝙘𝙚 𝙩𝙚𝙨𝙩𝙞𝙣𝙜, 𝙖𝙣𝙙 𝙨𝙪𝙧𝙜𝙚 𝙖𝙧𝙧𝙚𝙨𝙩𝙤𝙧 𝙧𝙚𝙨𝙞𝙨𝙩𝙖𝙣𝙘𝙚 𝙩𝙚𝙨𝙩𝙞𝙣𝙜 𝙩𝙤 𝙚𝙣𝙨𝙪𝙧𝙚 𝙨𝙮𝙨𝙩𝙚𝙢 𝙧𝙚𝙡𝙞𝙖𝙗𝙞𝙡𝙞𝙩𝙮. 5.𝘾𝙤𝙡𝙡𝙖𝙗𝙤𝙧𝙖𝙩𝙞𝙣𝙜 𝙬𝙞𝙩𝙝 𝙚𝙣𝙜𝙞𝙣𝙚𝙚𝙧𝙨, 𝙘𝙤𝙣𝙩𝙧𝙖𝙘𝙩𝙤𝙧𝙨, 𝙖𝙣𝙙 𝙢𝙖𝙣𝙖𝙜𝙚𝙢𝙚𝙣𝙩 𝙩𝙤 𝙢𝙖𝙞𝙣𝙩𝙖𝙞𝙣 𝙧𝙚𝙡𝙞𝙖𝙗𝙡𝙚 𝙥𝙤𝙬𝙚𝙧 𝙙𝙞𝙨𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣 𝙖𝙣𝙙 𝙘𝙤𝙣𝙩𝙞𝙣𝙪𝙤𝙪𝙨 𝙞𝙢𝙥𝙧𝙤𝙫𝙚𝙢𝙚𝙣𝙩. 6.𝙃𝙖𝙣𝙙𝙡𝙞𝙣𝙜 𝙪𝙣𝙪𝙨𝙪𝙖𝙡 𝙤𝙧 𝙚𝙢𝙚𝙧𝙜𝙚𝙣𝙘𝙮 𝙨𝙞𝙩𝙪𝙖𝙩𝙞𝙤𝙣𝙨 𝙚𝙛𝙛𝙚𝙘𝙩𝙞𝙫𝙚𝙡𝙮 𝙩𝙤 𝙢𝙞𝙣𝙞𝙢𝙞𝙯𝙚 𝙙𝙤𝙬𝙣𝙩𝙞𝙢𝙚 𝙖𝙣𝙙 𝙝𝙖𝙯𝙖𝙧𝙙𝙨 𝙚𝙩𝙘.

 Documentation and Recordkeeping  Safety Audits and Inspections  Safety Culture Promotion  Health and Wellness Programs  Contractor Safety Management  Emergency Response Coordination  Chemical Management and Hazardous Materials Handling  Safety Committee Participation  Safety Equipment Procurement and Maintenance  Documentation and Reporting  Risk Assessment and Management  Regulatory Compliance  Safety Training and Education  Incident Investigation  Emergency Preparedness and Response  Environmental Management  Communication and Collaboration  Data Analysis and Reporting  Continuous Improvement

My the duties and responsibilities at Busanza International Hospital and Research Center Project 1.Implementing OHSE Policies and Procedures 2.Monitoring OHSE Compliance 3.Hazard Identification and Risk Assessment 4.Training and Competence Development 5.Incident Reporting and Investigation 6.Emergency Preparedness and Response 7.Consultation and Communication 8.Monitoring Performance and Effectiveness 9.Supporting OHSE Audits and Inspections 10.Promoting OHSE Culture and Awareness 11.Continuous Improvement 12.Documentation and Record Keeping

My The duties and responsibilities 1.Developing OHSE Policies and Procedures 2.Risk Assessment and Hazard Identification 3.Training and Awareness 4.Monitoring and Evaluation 5.Incident Investigation and Reporting 6.Emergency Preparedness and Response 7.Consultation and Communication 8.Continuous Improvement 9.Compliance with Legal and Other Requirements 10.Documentation and Record Keeping 11.Management Review 220KV Rwanda -DRC Interconnections Substation Project (Rwanda part) @Rubavu substation 🙏 Never give safety a day off🙏

##NTARUKA "A" Small Hydropower Project ## “Safety has to be everyone’s responsibility… everyone needs to know that they are empowered to speak up if there’s an issue.”

1.Construction of transmission line from Nyakinama to Mukamira@CEC 2.Construction of transmission line from Rusumo to Shango @Sterling and Wilson

Electrical and Electronic Engineering in department of Renewable Energy