Jeremy Lin

•Project: The Substation Project at Point Comfort, Texas, USA. •Project Details: Building Construction and Electrical Cable, Wiring connection & Equipment (UPS, FTR, DC Battery Charger, 480V 1100kW & 600kW Diesel Generator, 13.8kV HBT,OIL TR & 13.8 KV/4.16 kV OIL & 13.8kV/0.48kV Cast Resin DRY TR,BUS DUCT, 480V SCADA, 13.8kV, 4.16kV & 480V Panel, 13.8KV & 4.16kV Capacitor Bank & 480V Capacitor, 4.16kV & 480V motor panel, 4.16kV MV SOFT STARTER, 4.16 kV VSD, 480V LV, VSD, MCIP panel ) Manufacture & FAT( Factory Acceptance Test) & Conveyance & Lay down, Move in, Installation, Testing & QC & SAT (Site Acceptance Test) & SIT (Site Integration Test), Commissioning and Power Energized work and monitoring all the construction cost & progress, safety, health & environment control, and quality control/assurance during the construction stage.

•Project: The Power Plant and Substation Project •Project Details: The Conventional Coal-Fired Power Plant and Substation Project. "Five connections and one levelling" refers to the preliminary preparations for a reasonable and orderly organization of construction in a construction project, which generally include: water supply, electricity supply, access, communication, drainage, and site levelling. •Responsible for general layout surveying for construction, Excavation of the foundation pit of the main plant, The construction of the main building foundation, Mass concrete pouring of the main workshop, Construction of steel structure of boiler room, Construction of the main factory building, Chimney construction, Construction of the steam turbine house, Construction of the deaeration room and the coal bunker room, The bearing seat of the steam turbine in place, Construction of the command and control room, Qualified water produced by the chemical water system, Buckle cover for steam turbine, Electrical reverse transmission, Boiler water pressure test, Boiler pickling, The successful cranking of the steam turbine generator set, The coal conveying system starts to load coal, First ignition of the boiler, Ignition flush tube, First grid-connected power generation，168 hours trial run completed, interface coordination, site arrangements, and construction quality control.

•Project: The Construction Project of Sports Shoe Factory (adidas) in Guangdong Province, China •Project Details: Construction of foundations, ground beams, pillars, girders, internal and external walls, floor slabs, construction of external structures (including landscape and others), reinforcement materials and inspection cutting, bending, assembly of steel reinforcement works and formwork installation, concrete works and waterproofing works, earthwork, Inspection of site preparation and backfilling works, hypothetical construction, interface coordination, site layout, water-stop materials and construction quality control/guarantee, steel bar processing and stockyard management. • Responsible for the planning and involved in the design stage of all the projects and monitoring all the construction cost & progress, Safety, Health & Environment control, and quality control/assurance during the construction stage. Responsible for large-scaled adidas sports shoe factory construction projects-office building, restaurant, dormitory, development center, supporting rubber sole factory, PU factory, molded EVA injection midsole factory, mold factory and old factory repair and renovation projects.

•Project: Aqua Planet Water Theme Park Construction Project in Luzon Island, Philippines. •Project Details: Civil construction stage: Strictly followed the planning drawings of the water park, especially the location of embedded parts, water inlets and outlets, and other important places. In addition, paid attention to load-bearing places and ensure that the foundation is firm. • Equipment installation and debugging stage: Work included: The amusement equipment from the manufacturer conveyed to site. Register and file with the local quality supervision department. The equipment manufacturer performed equipment installation work. (Aqua Loop, Flow Rider, Boogie Bay, Wave River, Octopus Racer, Mermaid Bay, Spiral Slide, Tornado, Super Bowl, skateboarding, filtering equipment, HVS, HVSB, ski Waterway installation, artificial wave, wave pool, indoor wave pool, outdoor wave pool, interactive water house, big horn slide, lazy river, swing slide, big bowl slide, double fly large loop slide, combination Slide, spiral six parallel racing combination slide, theme children's play, turn the river to the sea slide, wave slide, flying shuttle slide, swimming ring slide, water play.) The equipment manufacturer installed and debugged all the equipment, cooperated in the inspection and receipt of amusement equipment with client, conducted equipment maintenance and operation training for client.

•Project: Electrical Steel Coil Rolling Plant Construction Project at Dahej, Bharuch, Gujarat, India. •Project Details: Site Supervisor for Civil & Architecture work for the Construction Work of Electrical Steel Coil Rolling Plant & Public Facilities in India – Responsible for the India Electrical Steel Coil Rolling Plant & Public Facilities Construction Site Works (Office Building, Restaurant, Dormitory, Warehouse, Factory- Iron making, Steel making, continuous casting, hot rolling, cold rolling, annealing and coating equipment installation and public facilities, public pipelines, water pool, sewage tank, sewage treatment plant, air pollution treatment plant, substations) construction, Foundation, ground beams, pillars, girders, internal and external walls, floor slab construction, main steel structure (including external wall & corrugated roof) hoisting and installation, external structure (including roads, drainage systems, street lights, fences, landscape & greening and others), steel bar material testing and cutting, bending inspection, rebar installation and formwork assembling & installation, concrete grouting, waterproofing, earthwork and backfill engineering, interface coordination, site layout, water stop Material and construction quality control/guarantee, rebar processing and stockyard management.

•Project Details: Supervision work of Jiangxi Province section from Hangzhou to Changsha Passenger Line (High Speed Railway) connecting Hangzhou City, Zhejiang Province and Changsha City, Hunan Province, China. This section was part of The Shanghai-Kunming PDL -Passenger Dedicated Line (High Speed Railway). Hangzhou to Changsha PDL - Passenger Dedicated Line, a total of 921.426 km. •Activities Performed: Supervising for the pile testing, pile and pile cap construction, infrastructure (the foundation cofferdams located in the large rivers' deep water area, foundation, pier & pier cap) construction, superstructure (CIP- Cast In Place by supporting construction method, BCM – Balanced Cantilever Method --- Post Pulling Pre-stress Box Girder construction engineering method, FPLM – Full-span Pre-cast Launching Method - Post Tension Pre-stress Box Girder construction engineering method) and The Construction and Installation work of main components of Rheda track include JIS60 rails, fasteners (Vossloh 300 type), Rheda sleepers, Construction process of German Rheda 2000 Track: Protection layer (ground beam & leveling layer) construction, shear tenon (Cam Plate) & hydraulic bonding layer construction, sleeper & rail distribution, elastic isolation membrane (Elastomeric Foil) and elastic load-bearing gasket (Elastomeric Bearing) installation, track slab Bottom steel bar assembly, rail welding (first time), sleeper laying & rail installation, upper track slab steel bar & formwork assembly, track straightening, track slab concrete pouring, waterproof membrane spraying, ballast (sound-absorbing rock) transportation and distribution Installation and compaction work, rail welding (second time), insulated rail installation and rail welding (third time) (without expansion joints), rail prestressing, final rail adjustment, rail grinding, rail inspection, rail completion. - site assembly and installation of construction and quality control.

•Project Description: The AUO Taichung Phase 3 & 4 TFT-LCD Hi-Tec Plant Construction Project and 2009 World Games Main Stadium New Construction Project at Kaohsiung City, Taiwan. •Activities Performed: Responsible for AU Optronics Taichung Phase III and Phase IV TFT-LCD high-tech factory construction project and 2009 Kaohsiung World Games Main Stadium Construction Project. Civil and Construction Works: AU Optronics Taichung Phase III and Phase IV (Taichung Science Park). : Raft Foundation, Steel structure transportation, lifting and installation, columns, beams, (1-7F) floor, interior and exterior walls & clean room (air conditioning/ceiling/floor/water pipe / duct / EPOXY / electrical / monitoring system engineering) construction, World Games main stadium construction site, raft foundation, B1F, B2F (underground parking lot), reinforced concrete beam and column base, saddle curved RC support structure, concrete slab stand, roof steel truss, spiral steel pipe, auditorium stand floor slab Lifting and installation of PC board bases, roof steel truss, spiral steel pipes and solar photovoltaic panels (BIPV) roof Lifting & Installation and construction of external structures (including roads, drainage systems, street lights, landscapes, greening and others), steel bars Material testing and inspection of cutting, bending, assembling steel reinforcement works and formwork installations, concrete works and waterproofing works, earthwork and leveling and poor-quality concrete backfill works, hypothetical works, interface coordination, site layout, materials and water stop work Quality control, steel bar processing and stockyard management. (AUO Taichung Phase III and Phase IV new construction, Steel Structure quantity: about 120,000 tons, the new construction of the main stadium of the 2009 Kaohsiung World Games Steel Structure quantity: about 20,000 tons.)

•Project Description: Corning CDTT Taichung Phase 1 & 2 LCD Display Glass Hi-Tec Plant Construction Project at Taichung City, Taiwan (Taichung Science Park). •Activities Performed: Responsible for the Installation of pre-embedded bolts of steel structure during on-site raft foundation construction, Steel Structure Works for the Conveyance to Site, lay down, Lifting, Erection, Welding and Calibration & Adjustment works, Bolting (high tensile bolt) work, Welding work and NDT, Self-Inspection Work, laying Corrugated Sheet Metal & Welding, Shear Stud Welding for Decking of Corning CDTT Taichung Phase 1 & 2 Project. (Taichung Science Park). Qty. of the Steel Structure: Approx. 100,000 tons. Also experienced inspecting structural steel at manufacturing / fabricating locations.

Taiwan Shinkansen Track work Joint Venture (TSTJV) & Taiwan Shinkansen International Engineering Corporation (TSIEC). •Project Description: Taiwan High Speed Rail Project (THSRP)-Track work (T240&T230) comprises of 120 Km of HSR (Elevated: 110Km, Tunnel : 10 Km) with 4 Stations (Elevated: 4 Stations)_Taiwan Shinkansen Track work Joint Venture (TSTJV) & Core, Mechanical and Electrical work (E101&E102) comprises of 100 Km of HSR (Elevated: 92Km, Tunnel : 8 Km) with 4 Stations (Elevated: 1 Station, Underground: 3 Stations)_Taiwan Shinkansen International Engineering Corporation (TSIEC).. •Activities Performed: Responsible for the progress & quality control of Track bed, Projection, Protective Layer Construction, Benchmark installation, Temporary track laying & installation, Track J-Slab Installation, CA Mortar & Synthetic resin infusion(Injection), Rail Welding (1st time) & Rail Conveyance、Distribution & Installation work and small Retaining Wall construction, Waterproofing Membrane spraying, Ballast (sound - absorbing rock) Conveyance、Distribution & Installation and Compaction work, Rail Welding (2nd time), Track straightening & adjustable rail spacer resin infusion, Track prestressed, Insulated Rail installation & Rail Welding (3rd time) (No Expansion Joint), Final Track adjustments, Track grinding, Track detection, Track completed, on-site installation of the construction progress and quality control of supervision work of Taiwan High Speed Rail Project (THSRP)---Track works (T240 & T230). •Responsible for the progress & quality control of the conveyance 、lifting & installation and grouting of Galvanized Steel Pole, Supporting Arm, Portal Beam, Portal & Parallel Frame and Drop Arm (Tunnel Area), Cantilever and Steel Member installation, G-Wire, P-Wire, F-Wire installation (Erection operations on upper three wires), M-Wire, A-Wire, C-Wire installation(Erection operations on bottom three wires), Adjustment Work of Core, Mechanical and Electrical works ( E101&E102).

• Project Description: Taiwan High Speed Rail Project (THSRP) - Civil work C291(28 Km) & C280(34 Km) comprises of 62 Km of HSR (Elevated: 62Km) with 2 Stations (Elevated: 2 Stations). • Activities Performed: Responsible for Site Arrangement Work, Miscellaneous Work, Excavation Work, Re-bar Installation, Form Work, Concrete Pouring Work, Pile Testing, Pile (RCD, ACD Method) Construction, Substructure (Pile Cap, Pier, Pier Cap) Construction, Superstructure (CIP- Cast In Place by supporting construction method, BCM – Balanced Cantilever Method --- Post Pulling Pre-stress Box Girder construction engineering method, FPLM – Full-span Pre-cast Launching Method - Post Tension Pre-stress Box Girder construction engineering method), Superstructure Construction--- FSLM method, MSS method, CIP method, BCM method, Interface Coordination of Taiwan High Speed Rail Project (THSRP) --- Civil work C291 & C280 .