Ezio Scifo

- 2010, Design, installation and commissioning phases of the cogeneration boiler (recovery fumes from the furnace FLOAT). Power distribution and automation with interfacing with a DCS system; - 2011, Electrical design for medium and low voltage electrical distribution of a new Pilkington Poland plant. I took care the relationships with suppliers and I made all of the various tests. In this period were frequent trips for the purpose of meeting with the plant, visits qualification and public tendering. Summarizing: • Installed power: 12.6 MW; • Voltage Level: 30kV; - 2011, study on the 150kV arrival line; - 2011, North America (Canada and USA) to make replacements study; - 2011-2012, "Site Utilities Reference" in Poland for almost one year. - 2012, Electrical supervisor system for the Pilkington plant in Poland with Web Server; - 2012, Rebuilding of 7 electric transformer room in the San Salvo plant. Replacement of # 12 oil transformers with the new resin, MV cables, # 3 New Power Center, renovation of all civil works in # 2 premises. Replacement of the older MV protection system with new microprocessorrelay . - 2012, appointed PES in accordance to the "D.Lgs.81/2008, Art.82, Art.18 paragraph 1, lett. C of the standard EN50110-1 and CEI 11-27/1 "; - 2013, Construction of the new substation, Pilkington Melfi (PZ), adaptation "AEEG 136/2012/R/EEL"; - 2013, I am authorized to conduct maneuvers on the MV / LV electrical system in the San Salvo Plant (about 60MVA installed); - Tests of the various electrical cabinet (MV, LV, automation), transformers (MV / LV) in Italy and abroad. I supervised the heating tests of # 4 - 5000A Power Center according to the "CEI EN 61439-1 CEI EN 61439-2 " c/o the company Imesa Spa of Jesi (AN); - 2014 - I was engaged (3 months) in a construction site in Mexico where we installed a new line for tempered glass, I held the role of Site Electical Reference for automation and power distribution (installed capacity 7.5 MVA).

2014 - Design coordinator of a new production line (pre-process line) in Versailles (KY); - 2014 - Design coordinator for a new production line in Malaysia; - 2014 - Electrical design for medium and low voltage electrical distribution of a new NSG Poland plant. I took care the relationships with suppliers and I made all of the various tests; - 2015 (January- May)- Electrical site coordinator for all the power distribution (MV/LV) and for #3 new automation line, in the NSG plant in Poland, summarizing: • Installed power: 8.15 MW; • Voltage Level: 30kV; - 2015 (June)- Electrical site coordinator for #1 new automation line, in the NSG plant in CANADA, summarizing: • Press Bending System for Windscreen Glass; - 2015 (October - December)- Site Manager for #1 new automation line, in the NSG plant in CANADA, summarizing: • Windscreen Glass assembly line;