bálint molnár

In this institute, I was work for the geodesy department, and we measured the hungarian open-cast mines with RTK GPS, and check the received maps from the mine surveyours. Here I learnd more about AutoCAD Civil 3D and RTK technologies.

After the company supported my thesis and some other presentation, I got the opportunity to work in full time with the Riegl VMX MLS system. I learned the sytem, and the post-processing workflow here.

I did some subcontract tasks for Leica Geosystems Hungary, mostly in laser scanning topic.

In this time, I used to work first time with Riegl VMX-450 system. I used to do the post-processing, and vectorization, but in some cases, I supported the measurement with the measuring car.

* I used to work as a technician here. We used ITR and AutoCAD * AutoGeo softwares to do cadastre jobs around the county. I learned the use of Leica 1200 System (Total station * GNSS) here.

I'm working on post-processing tasks, where the raw measured point cloud has to be processed, and prepared for vectorization. I solve various tasks inside this processing job, such as coordinate system selection and transformation, planning of field measurement, quality control, etc.

I have the opportunity to teach a semester in laser scanning vectorization subject.

I learned here the most of my profession. I developed a uniqe interest about the laser scanning. In the University, this subject is rearely educated, so I have to self-learn this kind of profession. I did as much as I can in this subject, and later on, I got the opportunity, to teach this subject (point cloud vectorization) at the university for one semester.