Muhammad Asif Zakariyya, PMP®, M.Sc.

• Improved equipment reliability and safety through preventive and corrective maintenance of conveyor systems, ASRS (Wesfalia system), Robots (FANUC, ABB, KUKA), and PLC systems (AB, Siemens), various instrumentation systems, control valves, VFDs, weight scales (Hydraulic and electronic loadcells), x-rays (Eagle), and metal detectors (Fortress). • Diagnosed and resolved issues with automation equipment, including troubleshooting electrical, mechanical, and software problems to minimize disruptions to production. • Identified opportunities for process optimization and automation enhancements to increase throughput, quality, and safety standards. • Documented automation processes, procedures, and configurations for future reference and provide training to operations and maintenance staff on the proper use and maintenance of automated systems. • Ensured that automation systems comply with relevant regulations and safety standards, including electrical codes, machine safety standards, and industry-specific guidelines. • Maintained efficient operations by preparing, updating, and executing predictive and preventive maintenance plans in SAP ERP. • Provided support during emergencies or system failures, including rapid response to minimize downtime and implement recovery procedures to restore normal operations as quickly as possible. Worked on- call schedules as well. • Conducted thorough root cause analysis for automation-related issues and failures, utilizing tools such as fishbone diagrams, 5 Whys, or fault tree analysis and then implemented effective corrective actions to prevent recurrence. This greatly reduced downtime more than 30 percent. • Adhered to HSE policies, Ensured safe work environment.

• Performed Installation, calibration, and maintenance of instrumentation systems and equipment in manufacturing facilities. • Troubleshoot and diagnosed issues related to instrumentation systems to ensure smooth operations. • Collaborated with engineering and operations teams to design and implement improvements to instrumentation systems. • Developed and implemented preventive maintenance programs for instrumentation systems to minimize downtime. • Ensured compliance with regulatory requirements and industry standards for instrumentation systems. • Provided training and support to operations staff on the proper use and maintenance of instrumentation equipment. • Participated in project planning and execution for upgrades or expansions of instrumentation systems. • Conducted regular inspections and audits of instrumentation systems to identify areas for improvement. • Documented maintenance activities, equipment performance, and compliance records for instrumentation systems. • Kept abreast of advancements in instrumentation technology and recommending upgrades or enhancements as necessary.

• Designed lab procedures for various electrical engineering courses. These include instrumentation systems, Industrial Automation system, and various electrical circuit courses. • Delivered laboratory instructions to engineering students, providing training in the use of laboratory equipment, instrumentation techniques, and experimental procedures. Additionally, supervised their technical projects. • Performed instrument calibrations for various temperature and conductivity probes, pressure, level, and flow transmitters. • Performed maintenance of engineering labs (i.e. Robotics, Industrial Automation, IOT, and advanced instrumentation lab). Assist faculty in the development and refinement of laboratory experiments, instructional materials, and curriculum content to align with program objectives. • Collaborated with industry partners and stakeholders to ensure that laboratory facilities and equipment meet industry standards and requirements. • Participated in the evaluation and selection of new laboratory equipment and technologies to enhance student learning experiences. • Enforced safety protocols and guidelines to create a safe working environment for students and staff, including the proper handling of equipment and adherence to safety standards. • Managed inventory and procurement of laboratory supplies, equipment, and consumables to support ongoing lab activities and projects. • Maintained accurate records of laboratory activities, Lab procedures, test results, and equipment maintenance logs. • Assisted in the organization and coordination of industry placements, co-op opportunities, and student projects to provide real-world experience and enhance student employability. • Stayed updated on emerging technologies, trends, and best practices in the field of electronics engineering to continually improve the quality of education and training provided to students.

• Reviewed electrical specifications and drawings in accordance with CEC requirements. • Collaborated with architects and other stakeholders to integrate electrical systems into building designs. • Developed detailed electrical designs, including power distribution, lighting, fire alarm, and communication systems. • Ensured all electrical designs and installations comply with relevant Ontario Building Code (OBC), Electrical Safety Code, and other applicable regulations. • Secured necessary permits and approvals from regulatory authorities for electrical work. • Created and managed project schedules, budgets, and resources specifically for electrical components. • Procured electrical materials and equipment from suppliers and considered local availability and compliance with Canadian standards. • Supervised electrical installation activities to ensure adherence to design specifications, codes, and safety standards. • Conducted site inspections and quality assurance checks to verify workmanship and compliance. Led testing and commissioning activities for electrical systems. • Conducted performance tests and ensured systems operate according to design intent and regulatory requirements. • Maintained accurate records of electrical drawings, specifications, permits, and approvals. Prepared progress reports and documentation for project stakeholders and regulatory authorities. • Implemented and enforcing HSE policies and procedures related to electrical work on construction sites. • Conducted risk assessments ensuring safety protocols are followed to ensure workplace safety. • Communicated regularly with clients, contractors, and project managers regarding electrical project status, issues, and resolutions. • Provided support during the warranty period and addressed any post-construction issues related to electrical systems. • Assisted with the preparation of as-built drawings and documentation for handover.

• Actively contributed to the development and implementation of operational safety systems, including energy isolation procedures and permit-to-work protocols, while also participated in training sessions. • Oversaw the installation, commissioning, and maintenance of medium and low voltage (MV & LV) electrical systems and equipment, ensuring operational efficiency and safety. • Conducted comprehensive reviews of MV and LV switchgear schematics, specifications, load lists, and other technical documentation to facilitate procurement, inspection, and safe commissioning of electrical systems. • Demonstrated proficiency in problem-solving, team leadership, and analytical skills, fostering a collaborative and productive work environment. • Maintained meticulous documentation of inspection, testing, and commissioning activities in accordance with QA/QC and safety standards. • Led the installation, testing, and commissioning of HV/MV/LV cables, substations, switchgear, transformers, motors, UPS, and DC chargers, ensuring compliance with project requirements and specifications. • Commissioned gas-driven generator sets and emergency diesel generators (EDG) with intelligent sync controllers, adhering to black start philosophies and operational guidelines. • Implemented pre-commissioning and commissioning procedures and schedules to ensure the safe and efficient operation of equipment within project timelines. • Successfully performed pre-commissioning and commissioning of various E & I systems for oil and gas sector including MCC, electrical motors, Solar Power system, Earthing system, Cathodic Protection systems. • Installed and commissioned instrumentation systems (DCS panel, control valves, shut off valves, various transmitters, Gas chromatographs, Flow computers etc. • Prepared calibration certificates, installation acceptance, testing, and commissioning reports.

• Ensured proper functioning, calibration, and maintenance of laboratory equipment such as oscilloscopes, function generators, power supplies, multimeters, and other specialized instruments. • Set up experimental apparatus and configuring test setups according to lab requirements, including wiring, connections, and instrumentation. • Assisted faculty in developing laboratory experiments, designing lab manuals, and creating instructional materials to align with curriculum objectives and enhance student learning experience. • Developed PC1 for establishment of new electrical and telecommunication engineering department in the university. • Involved in procurement of new lab equipment for electrical and telecommunication engineering labs. • Trained and mentored students, researchers, and junior staff on Laboratory equipment like function generator, oscilloscope, various lab procedures. • Enforced safety protocols and guidelines to ensure a safe working environment, including proper handling of equipment, use of personal protective equipment (PPE), and adherence to electrical safety standards. • Managed inventory of laboratory supplies, equipment, and consumables, including procurement, organization, and maintenance of stock levels to support lab activities. • Maintained accurate records of experimental procedures, test results, equipment calibrations, and maintenance logs, and ensuring documentation complies with regulatory requirements and quality standards. • Implemented quality control measures to ensure the accuracy, reliability, and consistency of experimental data, including conducting regular equipment calibrations and performance checks.

Courses completed • Electrical Engineering Drafting and Design (AutoCAD/ AutoCAD Electrical) • Electrical Rotating Machines • Instrumentation & Process Control • Programmable Logic Controllers (PLC) • Project Management