anthony ker

Maintenance Works on Sabah Shell Petroleum Company (SSPC) two deep water floaters (Gumusut Kakap and Malikai).

Maintenance Works on Sabah Shell Petroleum Company (SSPC) two deep water floaters (Gumusut Kakap and Malikai).

LNG project for Yamal LNG (Offsite and Utility Modules)

Assign as a Structural & Piping Inspector for Aker Solutions on the Kumang Kanowit Sub Sea Protection Structure Manifold & Pipeline End Transmission (PLET) systems including the modules and Kikeh Accelerated Pipe Line End Transmission (PLET) including the Suction Anchor.

Assign as an Inspection Engineer/Field Engineer/Welding Inspector for Sarawak Shell Berhad (SSB) on the E8K/F13K Brown Field Scope monitoring Duplex Stainless Steel and Carbon Steel Piping Fabrication including pipe support and special pipe support under B31.3 Process Piping and Shell Engineering Standard (SES) for piping fabrication at shop.

Assign as a QA/QC Inspector for Japan Gas Corporation (JGC) on NCP Saudi Polymer project here in Vietnam fabricating 28 pressure vessel including stainless steel & sour service vessel under ASME Section 8 Division 1, Japan Gas Corporation (JGC) standard for fabrication and inspection and National Chevron Phillips (NCP) specification.

Assign as a QA/QC Structural Supervisor for Single Buoy Mooring (SBM) Johor Bharu Peninsular Malaysia on The Deep water MOPUstor Storage Tank project (Mobilized offshore production unit) which is a sub sea storage tank for YME Redevelopment that will be located in the North Sea approximately 110km away from Norwegian Continental Shelf under Det Norsk Veritas and NORSOK specification. It is a pilot project by Single Buoy Mooring Inc (SBM) constructed for Talisman Energy Norway.

Assign as a QA/QC Inspector at Dyna-Mac Engineering Services Sdn Bhd Bintulu Sarawak on the Gravity Actuated Pipe, (GAP System) which comprise a 48” OD pipe supporting 4 flow lines, which is submerged in 200 meters of water in between a Dry tree unit and a FPSO (Length 1.3km) under Det Norsk Veritas Standard and Single Buoy (SBM) specification. It is a pilot project by Single Buoy Mooring (SBM) constructed for Murphy Oil.

Assign as a QA/QC Inspector at Sarku Engineering Services Minor Fabrication Yard Labuan Malaysia under the supervision of Senior Inspector for Shell project, E11 Rejuvenation.

Assign as a QA Structural Inspector at Caspian Shipyard Company, Baku, Azerbaijan, for AGIP KCO Ancillary Steelwork and Pipe Rack Fabrication under EEMUA 158 Construction Specifications for Fixed Offshore Structures in the North Sea).

FPSO Cidade De Marica & Saquarema (Early Work and Conversion)