Adam Abdool B.S.,M.S.,MIET

Provide technical due diligence and coordination in the origination, development, and delivery of utility-scale Battery Energy Storage Systems, (BESS) and Renewable projects through design, procurement, construction/commissioning, and technical support of its AC and DC electrical systems.

Serve as the technical owner in the delivery of utility-scale Battery Energy Storage System, (BESS), projects through design, construction/commissioning, and technical support of its AC and DC electrical systems.

Secure, manage and execute technical studies related to industrial and distribution networks including planning and operational studies, DERs/Renewables integration, motor starting and stability studies, reactive power compensation, protective device co-ordination, arc flash evaluation, insulation co-ordination and electromagnetic transient studies. Software: ETAP/SKM, PSCAD, ASPEN, PSS/E Notable Projects included the foll: - Arlington Microgrid Project System Study - Atlantic City Electric’s Beach Haven BESS System Study - Baltimore Gas and Electric’s Fairhaven BESS SCCAF Study - Google Foxbat 1.0 Protection Coordination and Arc Flash Study - EDF Renewables Port of San Diego/TAMT Microgrid Study - Duke Osprey Insulation Coordination and Switching Study - Exelon Generation - Braidwood Station Insulation Coordination Study - Exelon Generation - Byron Station Insulation Coordination Study - Drake Cement LLC Load Flow Analysis, Short Circuit Study and Harmonic Analysis - PT Freeport Indonesia’s Voltage and Frequency Stability Study - Hammond Substation Project - Arc-Flash Evaluation and Protection Co-ordination Study

Project: Oil Search Alaska - Pikka Development Project, FEED. Key Responsibilities/Accountabilities include: - Conducted power system modelling and analysis of an 80MW islanded network inclusive of 17000hp rated synchronous motors. Completed power system studies inclusive of Load Flow, Short Circuit and Motor Starting Analysis via ETAP c/w accompanying reports - Developed Equipment Data Sheets & Specifications for all LV, MV and HV equipment, (480V through 34.5kV), inclusive of generators, transformers, switchgears/MCCs, motors, cable bus, cables, PMS, etc, - Preparation/Review of all electrical drawings and diagrams, inclusive of single line diagrams, electrical load list, area classification drawings, cable tray/cable routing diagrams, REIM layouts, cable schedule, etc. - Developed work release packages and coordinated with supporting GID office - Review of vendor bids for major/long lead equipment and completed input to technical bid evaluations - Prepared weekly project updates, provided interdisciplinary support, attended client/project weekly meetings

Projects: Trinidad Accommodations Project, (TAP)- Mahogany Bravo: Define/Execute, Trinidad Accommodations Project, (TAP)- Amherstia: Define/Execute Responsibilities: -Preparation of Engineering documents, CTRs, Electrical Basis of Design, Scope of Works, etc. -Preparation and review of electrical drawings and diagrams, which includes motor schematics, single line diagrams, grounding, area classification drawings, cable tray and cable routing diagrams,etc. -Conducted As- Building, Site surveys and reports -Developed Load Analysis and Generator Sizing Reports -Conducted Power System Studies: Load Flow, Short Circuit, Protection Coordination, Arc Flash -Analysis via ETAP and developed accompanying reports -Developed Generator Data Sheets and Specification -Developed Engineering Requisitions via Smart Plant Materials -Developed Technical Bid Evaluations of vendor bid submissions -Equipment/Material Inspections -Attended vendor Framing Workshop -Attended Generator FAT at vendor facility -Provided Construction/ Site Support -Revision/Development of Site Operating Procedures -Developed EX-registers for all electrical equipment

Projects: British Petroleum Trinidad and Tobago Category A Projects – Cassia C Compression Project, Amherstia Compression Project- Optimize, British Petroleum Trinidad and Tobago Category B Projects - Trinidad Onshore Compression, (TROC): FEED/Define/Execute, Atlantic LNG Master Service Agreement Trinidad and Tobago Arc Flash; Mitigation Project– Execute, Lab Relocation Project: Select/FEED/Detail Design, Boil Of Ga/Flashing Liquid Expander Project, (BOG): FEED, Nitorgen Upgrade Project,(NGU): FEED , Instrument Air Project, (IAU): FEED, Natural Gas To Liquids, (NGL): FEED, Effluent Management Project: FEED - Scope Development, Preparation of CTRs and Scedules

Projects: BPTT Brownfield Modification & Upgrade Program (Cassia B Modifications Project, Terminal Galeota Produced Water Treatment Project, Cannon Ball Inline Gas Compressor Project, Firewater Pump Relocation Project, Umbilical Project), BGTT BTIC Project. Responsibilities: -FEED and Detailed Design -Power System Studies (ETAP); Load Flow, Short Circuit, Protection Coordination, Arc Flash, Harmonic and Transient stability -Development of Load Lists, (both UPS and Normally Powered) -Sizing and Specification of all Electrical Equipment; (Generators, Transformers, Switchgear & MCCs ,UPS, Cables, ATS and Motors, etc -Engineering Calculations and Reports -Preparation of Engineering documents, CTRs, Electrical Basis of Design, Scope of Works,etc -Vendor liaison and procurement support -Technical Bid Evaluations of vendor bid submissions -Onsite Commissioning of all Power Distribution Equipment -Troubleshooting and Follow on Engineering

•Defines designs, develops, monitors and refines Asset Maintenance Plans for all product equipment. •Lead special projects and participate in engineering activities that will improve the reliability of the equipment, optimize maintenance costs, and reduce equipment downtime •Guides efforts to ensure reliability and maintainability of equipment, processes, utilities, facilities, controls, and safety/security systems. • Maximizes equipment reliability and operating profit through using planned maintenance. •Develop planning and scheduling for outages. •Develop, coordinate and support predictive maintenance practices in the plant. •Develops solutions that facilitate continuous improvement through new designs and innovative approaches to production equipment. •Coordinate major recommendations as to modifications, renovations, installations, additions and replacements of facilities and equipments. •Provides technical expertise and leadership to Maintenance Department. •Manage small capital projects as needed to improve plant and equipment. • Participate in Process Hazard Analyses. •Develops engineering solutions to repetitive failures, capacity problems, quality problems, and cost improvement opportunities. •Provide guidance to large capital project teams to ensure reliability and maintainability of new and modified installations. •Develops criteria for evaluation of equipment and technical service suppliers. •Assists technical craftsman to identify critical spare parts stocking requirements. •Reviews the selection of new equipment to ensure commonality of spare parts. •Applies value analysis to repair/replace and make/buy decisions.

•Evaluation and QA/QC inspections of all Plant Motors. ( Surge testing, rotor balancing, Hi Pot, etc) •Analysis of equipment failures and preparation of reports regarding findings and root cause of failures while identifying remedial actions, including revisions to the Maintenance strategy content and follow up on implementation of agreed actions. •Provision of technical data/specifications for the procurement of all electrical equipment. •Assist in troubleshooting of all plant electrical and production equipment. (Motors, transformers, UPS, generators, ATS ,etc) •Lead the implementation of the failures solving process using the structured methodology for Root Cause Failure Analysis and support and validate recommendations from Failure Reports. Responsible to present and validate recommendations with bpTT engineers. •Support maintenance department activities associated with the technical operations related to electrical equipment located either onshore or offshore. Specific procedures and materials/tools for safe and effective execution of offshore and onshore work, such as major equipment overhauls, annual shutdown, and equipment modifications. •Assist in the training and development of electrical technicians; BITE testing, maintenance procedures, etc •Recommend selection of vendors and contractors for the purchase of materials, equipment, and supplies, and contracting of engineering consultants, workshops and specialized technical services to improve operating efficiency.

•Responsible for the preventative maintenance, troubleshooting and calibration of all plant electrical and instruments associated with the M1 plant. This included transformers, switchgear, transmitters (flow, pressure, level, temperature, etc), motors, analyzers, ph meters, gauges and control valves. •QA/QC electrical inspector at the AUM site for the commissioning of 5 substations. This included insulation testing of cables, functional as well as relay testing of LV and MV switchgears(including MCC’s), transformer testing and inspection (ratio tests, PI, winding resistance, energizing etc,), bus bar inspections and testing, inspection of UPS and DCP’s, testing of ATS (automatic transfer systems), motor runs, etc. Also performed earth-mat and grounding resistance and checks. •Shop calibration of all plant Hart /Fieldbus protocol transmitters and valves.